------------------------------------------------------------------------ r5341 | ed | 2015-10-15 09:33:55 +0200 (Do, 15. Okt 2015) | 2 Zeilen - set qspirootfstype=ext3 ------------------------------------------------------------------------ r5304 | ed | 2015-10-12 10:56:58 +0200 (Mo, 12. Okt 2015) | 4 Zeilen - enable CONFIG_AUTOBOOT_KEYED - the default password is "stop" but can be overwritten with the environment variable bootstopkey ------------------------------------------------------------------------ r5302 | ed | 2015-10-12 10:08:57 +0200 (Mo, 12. Okt 2015) | 2 Zeilen - fix crash when presskey_max == 0 ------------------------------------------------------------------------ r5299 | ed | 2015-10-09 16:13:08 +0200 (Fr, 09. Okt 2015) | 2 Zeilen - re-generated fpga design ------------------------------------------------------------------------ r5296 | ed | 2015-10-09 12:08:41 +0200 (Fr, 09. Okt 2015) | 4 Zeilen - send a pulse to the hps_fpga_reset_n to fix the sec_eeprom reset - 100us because this is also the phy reset, and it needs the reset puls width to be 100us ------------------------------------------------------------------------ r5280 | ed | 2015-10-08 11:33:15 +0200 (Do, 08. Okt 2015) | 2 Zeilen updated ------------------------------------------------------------------------ r5251 | ed | 2015-09-30 09:34:06 +0200 (Mi, 30. Sep 2015) | 3 Zeilen - fixed device tree location - save u-boot and device-tree in one .hex file ------------------------------------------------------------------------ r5248 | klj | 2015-09-29 16:25:50 +0200 (Di, 29. Sep 2015) | 1 Zeile Adjusted the export script and description of exported files ------------------------------------------------------------------------ r5246 | klj | 2015-09-29 15:34:55 +0200 (Di, 29. Sep 2015) | 1 Zeile Adjusted the export script and description of exported files ------------------------------------------------------------------------ r5245 | klj | 2015-09-29 14:34:35 +0200 (Di, 29. Sep 2015) | 2 Zeilen Summary: Updated export.cmm to the same content as in http://srviad.dhcp.softing.com/svn/FG-x00-xx/trunk/EIP-Adapter-2-PN-Controller/BOOT/sdram/export.cmm ------------------------------------------------------------------------ r5244 | klj | 2015-09-29 14:14:12 +0200 (Di, 29. Sep 2015) | 2 Zeilen Summary: Corrected initrdaddr by factor 16 ------------------------------------------------------------------------ r5243 | ed | 2015-09-29 09:27:55 +0200 (Di, 29. Sep 2015) | 1 Zeile be prepared for gcc6 ------------------------------------------------------------------------ r5242 | ed | 2015-09-29 09:27:44 +0200 (Di, 29. Sep 2015) | 1 Zeile use same cross-compiler as in FGLINUX ------------------------------------------------------------------------ r4992 | klj | 2015-09-03 15:37:52 +0200 (Do, 03. Sep 2015) | 2 Zeilen Summary: Cleanup of uboot configuration bootargs ------------------------------------------------------------------------ r4912 | klj | 2015-08-27 16:38:44 +0200 (Do, 27. Aug 2015) | 2 Zeilen Summary: Corrected initrdaddr ------------------------------------------------------------------------ r4911 | klj | 2015-08-27 16:16:27 +0200 (Do, 27. Aug 2015) | 2 Zeilen Summary: Updated description to load initial ramdisk ------------------------------------------------------------------------ r4892 | klj | 2015-08-25 16:46:53 +0200 (Di, 25. Aug 2015) | 2 Zeilen Summary: Updated description for Oriole 1.10 kernel ------------------------------------------------------------------------ r4860 | ed | 2015-08-14 07:04:46 +0200 (Fr, 14. Aug 2015) | 2 Zeilen - enabled USDx_CDETECT inputs ------------------------------------------------------------------------ r4854 | ed | 2015-08-13 13:36:17 +0200 (Do, 13. Aug 2015) | 2 Zeilen - formatting... ------------------------------------------------------------------------ r4853 | ed | 2015-08-13 13:07:24 +0200 (Do, 13. Aug 2015) | 2 Zeilen - fix the signal/clock phase for output of the reset sequence ------------------------------------------------------------------------ r4852 | ed | 2015-08-13 12:11:43 +0200 (Do, 13. Aug 2015) | 2 Zeilen - add one 1-bit before each command ------------------------------------------------------------------------ r4844 | ed | 2015-08-10 11:00:03 +0200 (Mo, 10. Aug 2015) | 2 Zeilen - mmc_soft_reset add CMD7 to get out of programming state ------------------------------------------------------------------------ r4832 | ed | 2015-08-07 12:44:31 +0200 (Fr, 07. Aug 2015) | 2 Zeilen - implemented mmc card soft reset for dual sd card operation ------------------------------------------------------------------------ r4825 | ed | 2015-08-06 11:37:53 +0200 (Do, 06. Aug 2015) | 7 Zeilen derzeit ist nur die interne SD-Karte aktiv. Ansprechbar unter /dev/mmcblk0. die externe SD-Karte (/dev/mmcblk1) ist _noch_ ohne funktion. Die uboot-default-parameter laden den kernel von QSPI und booten dann von interne SD-Karte, partition 1: /dev/mmcblk0p1 ------------------------------------------------------------------------ r4824 | ed | 2015-08-06 08:07:05 +0200 (Do, 06. Aug 2015) | 3 Zeilen updated io scan data: - probably due to "assign MAXIMUM_CURRENT/SLOW to TRIGGER_OUT" ------------------------------------------------------------------------ r4823 | ed | 2015-08-06 07:06:59 +0200 (Do, 06. Aug 2015) | 2 Zeilen - update ethaddr template to new MAC Device Type 51 (0x33) ------------------------------------------------------------------------ r4821 | ed | 2015-08-05 14:02:28 +0200 (Mi, 05. Aug 2015) | 2 Zeilen - re-generated fpga firmware ------------------------------------------------------------------------ r4820 | ed | 2015-08-05 13:58:39 +0200 (Mi, 05. Aug 2015) | 2 Zeilen fine-tuning... ------------------------------------------------------------------------ r4819 | ed | 2015-08-05 13:25:56 +0200 (Mi, 05. Aug 2015) | 5 Zeilen - disabled I2C EEPROM access if emac address is not in environment - explicitly wait for first access to SEC_EEPROM - print an error message if SEC_EEPROM fails - permanently disable ENET and SD card if SEC_EEPROM fails ------------------------------------------------------------------------ r4817 | ed | 2015-08-05 11:52:56 +0200 (Mi, 05. Aug 2015) | 2 Zeilen - ttyS1 => ttyS0 ------------------------------------------------------------------------ r4805 | ed | 2015-07-31 10:58:15 +0200 (Fr, 31. Jul 2015) | 2 Zeilen - remove the silly dram cs-bits errata workaround ------------------------------------------------------------------------ r4804 | ed | 2015-07-31 09:54:18 +0200 (Fr, 31. Jul 2015) | 2 Zeilen - change ttyS1 => ttyS0 ------------------------------------------------------------------------ r4801 | ed | 2015-07-30 15:33:16 +0200 (Do, 30. Jul 2015) | 3 Zeilen - drive TRIGGER_OUT <= '1' - drive FACTORY_RESET <= 'Z' ------------------------------------------------------------------------ r4800 | ed | 2015-07-30 15:08:25 +0200 (Do, 30. Jul 2015) | 6 Zeilen prepare for new hardware design - adapt to new DRAM chips, use 1GB - prepare for dual SDCARD (not using CARD#2 at the moment) - use the new LED pins - use the new WDI pin ------------------------------------------------------------------------ r4407 | ed | 2015-05-08 08:26:46 +0200 (Fr, 08. Mai 2015) | 2 Zeilen - fix timer code ------------------------------------------------------------------------ r4360 | klj | 2015-04-30 15:40:11 +0200 (Do, 30. Apr 2015) | 1 Zeile updated the description to configure u-boot to boot from sd-card ------------------------------------------------------------------------ r4358 | ed | 2015-04-30 13:33:32 +0200 (Do, 30. Apr 2015) | 3 Zeilen - fix sd card busy when writing more than 2MB (assuming, 10 seconds are enough). ------------------------------------------------------------------------ r4357 | klj | 2015-04-30 13:04:29 +0200 (Do, 30. Apr 2015) | 1 Zeile Updated the description how to boot permanently/automaicly from sd-card ------------------------------------------------------------------------ r4356 | klj | 2015-04-30 12:31:27 +0200 (Do, 30. Apr 2015) | 3 Zeilen Added the rootwait argument because the MMC driver needs to be initialized before the rootfs could bemounted. ------------------------------------------------------------------------ r4355 | klj | 2015-04-30 11:47:20 +0200 (Do, 30. Apr 2015) | 2 Zeilen Added the initial definition of bootargs to use the 2nd partition of the sd card as root device ------------------------------------------------------------------------ r4354 | klj | 2015-04-30 11:11:02 +0200 (Do, 30. Apr 2015) | 1 Zeile Added initial description how to boot the kernel from sdcard ------------------------------------------------------------------------ r4351 | ed | 2015-04-29 16:26:56 +0200 (Mi, 29. Apr 2015) | 2 Zeilen add support for gcc 5.1.0 as cross-compiler ------------------------------------------------------------------------ r4320 | ed | 2015-04-24 09:26:17 +0200 (Fr, 24. Apr 2015) | 8 Zeilen Occasionally "sf erase" fails with the following error: QSPI: QSPI is still busy after poll for 10000 times. Therefore, removed cadence_qspi_wait_idle as it made only problems and should not be needed. The command completed, but why is the QSPI controller still busy? My assumption is that the next QSPI command will nevertheless execute normally. ------------------------------------------------------------------------ r4319 | ed | 2015-04-24 09:13:47 +0200 (Fr, 24. Apr 2015) | 2 Zeilen - set QSPI speed to 100MHz as our board design and QSPI parts support 100 MHz ------------------------------------------------------------------------ r4314 | ed | 2015-04-23 15:53:14 +0200 (Do, 23. Apr 2015) | 2 Zeilen - fix the svn version if $LANG != "C" ------------------------------------------------------------------------ r4305 | ed | 2015-04-23 10:16:59 +0200 (Do, 23. Apr 2015) | 6 Zeilen - fixed sdmmc card_detect signal - disable sdmmc reset after fpga is loaded - remove qspi read capture delay calibration feature - we use always a fixed/configured value of 4 - enabled executable bit on tools/setlocalversion ------------------------------------------------------------------------ r4301 | ed | 2015-04-22 15:24:29 +0200 (Mi, 22. Apr 2015) | 10 Zeilen added support for SD/MMC: - changed sdmmc_clk to 200 MHz (SD card is working at max. 50 MHz) - enabled routing of SD/MMC signals to FPGA and back to LOAN_IOs - enabled SDMMC clocks - disabled SDMMC reset - enabled CONFIG_MMC, CONFIG_CMD_MMC - disabled CONFIG_CMD_USB - fixed a few GCC warnings - generated FPGA firmware from r4278 (to support SD/LOAN_IO routing) ------------------------------------------------------------------------ r4257 | ed | 2015-04-17 08:15:40 +0200 (Fr, 17. Apr 2015) | 2 Zeilen - generated FPGA firmware from r4253 ------------------------------------------------------------------------ r3939 | ed | 2015-03-04 15:46:24 +0100 (Mi, 04. Mär 2015) | 3 Zeilen - regenerated the design with enabled PULL-UPs - set LED_FFx_y, GPIO0-15 and RS485_TX to INPUT by default ------------------------------------------------------------------------ r3932 | ed | 2015-03-04 11:00:00 +0100 (Mi, 04. Mär 2015) | 22 Zeilen - configured these pins (signal names as on the db connector): RS485_TX <= '0' GPIO0..GPIO15 <= '0' - note: RS485 is GPIO[52] GPIO0 is GPIO[21] GPIO1 is GPIO[9] GPIO2 is GPIO[23] GPIO3 is GPIO[24] GPIO4 is GPIO[25] GPIO5 is GPIO[26] GPIO6 is GPIO[27] GPIO7 is GPIO[57] GPIO8 is GPIO[1] GPIO9 is GPIO[54] GPIO10 is GPIO[3] GPIO11 is GPIO[13] GPIO12 is GPIO[44] GPIO13 is GPIO[45] GPIO14 is GPIO[47] GPIO15 is GPIO[65] ------------------------------------------------------------------------ r3911 | ed | 2015-03-03 09:28:10 +0100 (Di, 03. Mär 2015) | 2 Zeilen print "BOARD : Softing FG200 Board" ------------------------------------------------------------------------ r3908 | ed | 2015-03-02 15:45:21 +0100 (Mo, 02. Mär 2015) | 2 Zeilen - fixed GPLINMUX for GPIO51 ------------------------------------------------------------------------ r3903 | ed | 2015-03-02 10:30:35 +0100 (Mo, 02. Mär 2015) | 3 Zeilen - regenerated FPGA design with weak pull-up resistors on certain signals - new script update_fpga_design.sh for update of simple changes in fpga ------------------------------------------------------------------------ r3881 | ed | 2015-02-25 14:48:26 +0100 (Mi, 25. Feb 2015) | 2 Zeilen - initialize GPIO pins. ------------------------------------------------------------------------ r3862 | ed | 2015-02-24 10:34:27 +0100 (Di, 24. Feb 2015) | 20 Zeilen - added a preloader-info property to the device tree with the info from the preloader data area at 0xFFFF0100. - this can be accessed under linux at the path /sys/firmware/devicetree/base/chosen/preloader-info hexdump -C /sys/firmware/devicetree/base/chosen/preloader-info 00000000 b1 68 de 3a 02 02 01 00 00 00 00 80 00 00 0d 80 |.h.:............| 00000010 00 00 0e 80 00 00 00 00 02 00 00 00 00 00 00 00 |................| 00000020 consists of: .long 987654321 /* magic number softing boot block */ .long 0x00010202 /* manuf. code 1 device 2 revision 2 */ .long 0x80000000 /* start address image_1 (at block boundary) */ .long 0x800D0000 /* start device tree (at block boundary) */ .long 0x800E0000 /* start linux firmware (at block boundary) */ .long unused .long reboot-reason /* 2=normal, 0x4000=watchdog, etc. */ .long unused ------------------------------------------------------------------------ r3851 | ed | 2015-02-20 13:35:58 +0100 (Fr, 20. Feb 2015) | 2 Zeilen - print an error message if the FPGA firmware does not load. ------------------------------------------------------------------------ r3849 | ed | 2015-02-20 13:27:02 +0100 (Fr, 20. Feb 2015) | 2 Zeilen - regenerated everything with minimal FPGA design and Q14.0 ------------------------------------------------------------------------ r3840 | ed | 2015-02-20 09:42:57 +0100 (Fr, 20. Feb 2015) | 3 Zeilen - fixed SYSMGR_PINMUXGRP_GPLINMUX address macro. - moved the EMAC PINMUX initialization to board_eth_init. ------------------------------------------------------------------------ r3839 | ed | 2015-02-20 09:22:28 +0100 (Fr, 20. Feb 2015) | 5 Zeilen - add some simple GPIO macros - disable hardware watchdog after relocation in board_late_init - implement i2c_soft_reset - tested i2c_soft_reset, works! ------------------------------------------------------------------------ r3833 | ed | 2015-02-19 12:49:34 +0100 (Do, 19. Feb 2015) | 2 Zeilen - fixed the eth1 interface ------------------------------------------------------------------------ r3827 | ed | 2015-02-19 07:24:28 +0100 (Do, 19. Feb 2015) | 2 Zeilen - enable nfsboot via eth0, when more than one ethernet interfaces come up ------------------------------------------------------------------------ r3826 | ed | 2015-02-18 14:04:20 +0100 (Mi, 18. Feb 2015) | 2 Zeilen - fixed the sporadic memory corruption on nfsboot ------------------------------------------------------------------------ r3825 | ed | 2015-02-18 12:54:31 +0100 (Mi, 18. Feb 2015) | 3 Zeilen - set default bootimagesize=0x420000 - add description how to program device-tree and linux-image to qspi ------------------------------------------------------------------------ r3823 | ed | 2015-02-17 08:23:36 +0100 (Di, 17. Feb 2015) | 2 Zeilen - created UBOOT for FG2xx-A2 hardware ------------------------------------------------------------------------